The Wall, must have a separator between the petroltank and the cabin. This wood wall are enough

for doing  the job. Will put colored fabric on it later.

Hoses for heater - holder.

Needed holders for the hoses that runs to the heater unit inside the car, these hoses must not touch the very hot engine exhaust pipes.

Rear view mirror

I've bought this mirror over two years ago, now this week I finally could make a mounting plate to it and see how nice the mirrow looks when in place - neat !

Hatshelf with isolation

Have finished the welding of the hatshelf below the window with black paint and isolation. Looks neat when in place. Needs to be dressed with some nice looking fabrics later on. Now it's start up that are the goal so I'll do it sometime in the future.

Heat in the cabin

This week I've got the heater in place - finally. It's an old FORD heater complete with fan. Has been rebuild (of course) the coppertubes are new welded in other direction. Also connected up to window outlets with silverpaper hoses. This are law in sweden to have this heater since we have cold weather 6-7 months.

Time Counter

Have bought and installed a timecounter for the engine, can be nice to have later on to see how many hour's the engine have runned. Practical also for the oil changing intervals.

The second door a getting ready to be mounted to the body, the lock pin are  to be welded to the steel frame   

In place finally, a cover for the handbrake

with dust and plastic cover inside.

LED light in front, both signal and parking light are of a round model

Manufactured a frame and mounted the rubber for the gearshifter tonight, will also need to add some sealent around the rubber/steel contactsurface.

 Produced a steel holder for the ignition key, lightswitch and hornswitch. 

Trunk of Rod

Air inlet to the cupe'

I have been thinking, I've hope. The air inlet that I've have done before with a electrical small engine couldn't stand water. So I have made a water collector on it. Took many hours but now it is mounted, I have also a plastic hose all way down to the frame on the passanger side.

Water for front window/tank

Have this evening, made a holder for a used watertank from the scrap yard, I need also tomake
an opening from the trunk later on.

No water in the trunk

Started last week to make a drainage for water that will come in the channel around the read hood, even if it's closed. Have mounted it today, here you can see the result. I really hope this will work fine since water in the trunk really are something to get frustaded over.

Earth cable for the pertroltank

Have today got the cable in place, it's importent to avoid get static power to the tank.

Electrical main from trunk to start engine

Today I,ve started to mounted the power cable. Here are a picture.

Have started to build the side walls to the trunk, here you can see the first edition, second maybe going to be enough.

The Doors

Since the body came w/o ready made doors, I have to do everything myself, doorframes, locks, powerwindows and much more, finally I getting to the point where I can glue the doorhalfs together.

Rear Lights

A picture from the rear in which you can see my neat diode rearlights.

More pictures from the trunk

More pictures from the rear trunk.

Electrical Rear end

Have installed the electrical in the trunk, looks nice doesn''t?

Power to the head lights

Have started to mount the electrical system, in these pictures you can see the front main lights and cooling fan for radiator.

Summer in the air

The rod are looking out, if the weather was better it might jumped out of the garage.

Coolin' the engine

Have today mounted the electrical fan, had to place in front of the radiator. The engine are to close, you need at least 8.5 cm for this unit, so - in front it is.

If an accident accurs!

Have mounted a non return valve from an Audi in the Rod.
This little unit makes the gastank breathe- normalwise. But when
or if the car is upside down the unit will close itself. Means that
it will avoid the gasolin spill out throu it - great and safe!

Let it rain !

Last night's I've mounted the front wipers. Not diffcult but you got tomake a holding plate on the inside and a "angle washer on the outside. But nice when its finished.

Breathers !

According to swedish rules you need to connect headcover breathers to the air intake on a new car (2010 model) which my car is going to be to pass the registration. So I've have today also made this connection. Nature, we are caring for you!

Air filter - with style

Today I have mounted the nice lookin' airfilter with 3 red valves in the front. Took some time to get a filter inside it. Seems to be done w/o (at least this one). Also to get a steelbar to connect to the throttle. Really neat!!

Air-intake to the driver

To get the car throu the registration I need to have an air intake to the cupe' to pass the registration here in Sweden. I had an electric device laying around in the garage. Have made 2 holders and mounted it and now it seems to work just fine. Nice with just a knob that I can push left or right.